Dremel Mini Saw

Wednesday, March 31, 2010

0 4" Mini Table Saw Hobby Crafts 4500RPM w/ 2 Blades

Review 4" Mini Table Saw Hobby Crafts 4500RPM w/ 2 Blades

Buy Cheap 4" Mini Table Saw Hobby Crafts 4500RPM w/ 2 Blades From Here Now!

Readmore

Technical Details

- Max Cut: 90º: 3/4"
- Blade Capacity: 4" Inch
- Motor: 0.9 amps @ 110V 60Hz, 4500RPM
- Table: 7-1/2" x 5 -1/2 x 6-1/2
- Content: Table Saw, 1 x 4" 24 tooth Carbide Tip Blade & 1 x 4" Diamond Blade
See more technical details
Customer Buzz

"Best little tool I own" 2009-07-22
By Elaine Killingsworth (Andalusia, AL)
This the is best little tool I own. It is easy to use for my small crafting cutting needs. You can't go wrong with this for your small wood cutting projects.

Customer Buzz

"This saw is JUNK" 2009-05-27
By William E. Gillmore
This product arrived with a wobble on the saw blade. I decided to try the other blade and see if it wobbled. I soon found out that to change the saw blade you have to disassemble the saw. To change the blade you must remove the motor as well as the safety ground, essentially every screw on the machine must be removed. Be sure the unit is unplugged as it is easy to trip the power switch, which now has the ground removed and the motor detached from the cast mount with a sort of sharp carbide blade attached. Removed the nuts to get the blade off requires two very large metric wrenches. When the saw is to be reassembled the blade must be realigned or it will cut at an angle. There is no facility for doing this except by trial and error. While doing that you will no doubt gouge the blade into the cast iron blade guard as there is almost no clearance between the blade and the cast mount.

Having discovered all that I mounted the second diamond tip blade. It wobbled too. Further investigation showed that the motor shaft was bent.

After all that there is more bad news. The saw has near zero adjustment in blade height. The adjustment is by set screw and has no method to slightly adjust, it just moves any way it wants. The saw is also noisy and rattles badly.

I regret the day I ever bought this saw. It is an unmitigated piece of [...].

Customer Buzz

"You are better off at h\Harbor Freight" 2009-04-09
By Harry Kruz (Gainesville, Florida)
At this price point, you are much better off with the
Customer Buzz

"Disappointed" 2008-12-13
By B. E. Leissner (Texas)
I should have paid more attention to the describtion. This is too dangerous to be a toy and to little to be anything but a toy. Do Not buy this

Customer Buzz

"Needs improvement" 2008-10-26
By Clayton Schwartz (Quincy, Pa. United States)
A great idea for small work, but designed poorly. High speed, but no power. Even cutting 1/4" plywood bogs it down. Blade is not true enough to do fine work. The built in blade cover prevents cutting long pieces. They will not clear the bracket for the cover. Such a great idea if designed properly.

Images Product

Tuesday, March 30, 2010

0 Dremel MS400 MultiSaw Attachment

Review Dremel MS400 MultiSaw Attachment

Buy Cheap Dremel MS400 MultiSaw Attachment From Here Now!
Designed exclusively for the Dremel® 400 Series XPR rotary tool to perform precision cutting in hard-to-reach areas. Balanced and comfortable, the XPR MultiSaw's compact size makes it ideal for cutting in spaces where other saws can't reach.
Readmore

Technical Details

- Universal blade holder for optimal versatility
- Uses U and T shank blades for a variety of applications
- Features 3/8-inch blade stroke for fast and controllable cutting
- Cuts materials up to 1-1/2-inch thick with supplied blade for cutting applications large and small
- 5-year warranty for increased reliability
See more technical details
Customer Buzz

"Don't expect too much." 2009-11-11
By AWBoater (USA)
I was very disappointed in this tool. I bought it to cut out a 12" x 6" panel in 1/4" thick fiberglass with 1/16" aluminum on one surface. Since it used standard jig saw blades, I figured it would be up to the task.

The primary reason I used this item rather than a jig saw is that I had a restricted area where the jig saw would not fit.

It made it about half way through the job when it quit working. When I disassembled it, I found it had nylon (or perhaps simply plastic) gears, which were rounded smooth. The manual does caution against running the tool too fast, and I did heed that, but its supposed to be able to cut through 1 1/2" material, so I figured it should have worked for my application. But at any rate, for almost $30, it should have metal gears.

Unless you are cutting thin or soft material, get something heftier, like a pneumatic saw.

Customer Buzz

"Good concept. Poor carry through." 2009-10-27
By W. Johnson
This is a replacement. My old one worked great, but a part broke and I was forced to buy a whole new replacement. No parts are avalable.

Customer Buzz

"Useless." 2009-07-02
By R. Duterte (New Brunswick, NJ United States)
I've tried using this saw on multiple occasions with multiple materials, and it's just useless. Originally, I thought it was my own fault, attempting to cut some pretty thick plywood. But I recently attempted to cut plywood that was maybe an 1/8" thick and it took forever. I finally gave up and went to Lowes to buy a HAND coping saw, and it was much faster.

I know it's less than $20 here, but I think you're better off getting a dedicated jigsaw.

Customer Buzz

"Nice attachment, but not as usefull as advertised" 2009-05-09
By Ravenant211 (Upland, CA USA)
I bought this from a local Lowe's when I bought my XPR400 Dremel tool. I was building a guitar amp cabinet actually and just wanted something to make a few straight cuts in some smaller sections of plywood. This seemed adequate based off it's list of features and claimed abilities. I didn't expect it to do as well as a powered jigsaw for example but figured that it would do well enough for my limited needs. I also needed to make 4 rounded corner cuts and since it claimed to be able to do this that convinced me to try it.

The piece assembled easily and with no fuss. It started up and functions like it should mechanically. The problem is that it just lacks the needed amount of power to perform to the standard it claims. I turned it up to it's maximum and it wouldn't even get a quarter of an inch into the plywood before the dremel would start to overheat and slow down. I let it do this twice, the second time it slowed down almost to a stop and the whole unit felt VERY hot to the touch. I decided not to risk it after that as I didn't want to damage the dremel. I was very careful to not cover up the air vents on either piece. I held it with both hands as directed and the wood was very securely clamped down. I also proceeded slowly and tried to let the tool do the work, it would never grab and cut on it's own though. Plywood is not a hard wood and should not be difficult to cut with a jigsaw attachment.

I ended up just going back to Lowe's and buying a powered jigsaw. It cut the plywood like butter, was able to do the rounded corners like I needed and was not that much more expensive than this unit in the store.

The dremel tool works great for it's intended uses, I even used the dremel to smooth out the rounded corners I cut with the jigsaw. This attachment however is very lacking. It may perform well with very thin sheets of wood or metal or perhaps with something like particle board or drywall. I decided to keep it despite the lack of performance because I do have to cut drywall occasionally and so this may come in handy. I will try it out next time to see if it has any uses at all.

I decided to give it two stars because the tool may work well for lighter duty uses that I haven't tried it with yet, but it's definitely not able to do what the packaging information claims. Unless you need something for small projects with light materials save your money and just buy a powered jigsaw, you probably won't have to pay that much more than you would for this!

Customer Buzz

"Good if you do not already have a jigsaw." 2009-03-25
By Dave - Free as Can Be (Franklin, TN)
I have only used this attachment once. It worked fine but when you attach it to the Dremel tool you end up with a tool that is quite high and a little awkward. If you plan to use this attachment a lot, you should first consider a full size jigsaw. Also, this attachment only works with the Dremel 400 XPR. I think you could buy a full size jigsaw for less than buying the 400 XPR with the MultiSaw attachment. However, Dremel makes a small planer for use with the 400 XPR that is quite handy. So, if you were going to buy a 400 XPR, the MultiSaw attachment and the planer would be reasonable additions. Also, I think Dremel made a mistake by making attachments that only work with one model of tools. By doing so, they are missing a big piece of their own market by not designing an attachment that will work with all of their tools. If this attachment worked on all of the Dremel tools I would have rated it with 4 stars.

Images Product

Monday, March 29, 2010

0 Dremel 575 Right Angle Attachment for Rotary Tool

Review Dremel 575 Right Angle Attachment for Rotary Tool

Buy Cheap Dremel 575 Right Angle Attachment for Rotary Tool From Here Now!
Take a new angle of approach to difficult jobs with the Right Angle Attachment for our corded rotary tools and our 10.8V Lithium-ion Cordless Rotary Tool.; Whether you're drilling in a tight area, grinding rust off cars or snowblowers, or porting and polishing an engine cylinder, all sorts of hard-to-reach areas become instantly accessible.; The quick connect system makes it easy to attach in place of the housing cap (no tools necessary), and the coupling system gives you a choice of 12 different positions on the tool.; Ball bearings and spiral bevel gears provide smooth and cool operation.; Coupling system allows you to orient the attachment on your tool in 12 different directions.; Quick connect system easily attaches to your rotary tool in place of the housing cap, with no tools required.; Compact, durable design for long-lasting, versatile use.; Includes #575 Right Angle Attachment only; Tools Compatible with this attachment: #275-02 Single-Speed MultiPro Rotary Tool, #2850-02 Two-Speed MultiPro Rotary Tool Kit, #395 Variable-Speed MultiPro Rotary Tool, #398 Digital Rotary Tool, #400 XPR System, #7800-02 9.6V Cordless MultiPro Rotary Tool Kit, #8000-01 10.8V Lithium-Ion Cordless; ;;;; ;
Readmore

Technical Details

- Quick connect system easily attaches to your rotary tool in place of the housing cap without the need of tools
- Coupling system allows you to orient the right angle attachment on your tool in 12 different directions
- Ball bearing and spiral bevel gears give long lasting durability along with smooth and cool operation
- Compact design allows you to get into hand-to-reach places
See more technical details
Customer Buzz

"Wish I had it 40 years ago..." 2010-01-30
By Brian F. Class (Ashburn, VA USA)
This is not a heavy duty device, but it is extremely useful and should easily last years the way I use it and for its price, I'll buy another when/if I wear it out. There are a significant number of cutoff and cut-into things that I do and this right angle head maks those so much more easily done, and safely done (when wearing a face shield). Just wish I had been looking at what dremel has been doing rather then waiting for my 30 year old dremel to fail before I looked at new accessories. If you are a hobiest and/or into your home repair - get it, you will find uses for it that will undo those aukward angles you do now.

Customer Buzz

"NICE TO HAVE" 2009-12-16
By howie (el segundo ca)
yes this is nice to have when you need it, if you use it 2-3 times it is worth its low price, works well, would buy again!

Customer Buzz

"Great tool for tight spaces" 2009-08-23
By Peter Neville Harrison
Great tool for getting into tight spaces. I needed to drill

holes for shelf-support pins in a very narrow kitchen

cabinet and this worked out well. Keep in mind that this

is not (nor is it meant to be) a heavy-duty power tool.

It seems to be reasonably well made and the price is

right. An excellent addition to most any Dremel tool kit.

Customer Buzz

"Gets in there - but a bit noisy" 2009-06-23
By Chaditude (Alviso, CA)
Liked this product. It's a little tricky to get connected at first to have it line up at 180 degrees from the handle, but works just fine. Adds a bit more noise to the tool, which is a non-plus, but it makes those hard-to-reach angles from before well worth it.

Customer Buzz

"Dremel right angle attachment" 2009-04-24
By A. Mata (dallas)
Use it once so far , But I can tell it,s going to be a great addition to my tools. I put a 1" diamond cutoff blade on it and cut my holes for my plumbing in tile. Diamond blade, a little water, and the right angle attachment to get you in hard to get to places. Great tool. Thanks

Images Product

Sunday, March 28, 2010

0 1/8" Mini Drill Saw

Review 1/8" Mini Drill Saw

Buy Cheap 1/8" Mini Drill Saw From Here Now!

Readmore

Technical Details

- Can be used with Dremel, Craftsman, and most other Rotary Tools
- 1/8" shank
- Titanium coated
- Drills, saws, reams, and cuts
- For use on wood, metal, or plastic
See more technical details

Images Product

0 Proxxon 28174 24-Tpi Fine Toothed Band Saw Blade for MBS 115/E Swedish Steel

Review Proxxon 28174 24-Tpi Fine Toothed Band Saw Blade for MBS 115/E Swedish Steel

Buy Cheap Proxxon 28174 24-Tpi Fine Toothed Band Saw Blade for MBS 115/E Swedish Steel From Here Now!
These high-performance band saw blades are extremely efficient and are very unlikely to break, even when being used for prolonged periods. Each band saw blade is alternately set with teeth in N-form, which are individually sharpened. This type of toothing provides oscillation-free operation of the saw blade, which is extremely important in order to obtain straight and clean cuts.
Readmore

Technical Details

- Swedish steel high performance blades are unlikely to break even when used for prolonged periods
- Each band saw blade is alternately set with teeth set in N-form and individually sharpened for oscillating free operation for very clean cuts
See more technical details

Images Product

Saturday, March 27, 2010

0 Proxxon 28729 80mm Cut Off Wheels for KGS 80

Review Proxxon 28729 80mm Cut Off Wheels for KGS 80

Buy Cheap Proxxon 28729 80mm Cut Off Wheels for KGS 80 From Here Now!
For cutting wood, steel, non-ferrous metals and plastics.
Readmore

Technical Details

- For cutting wood, steel, non-ferrous metals and plastics
See more technical details

Images Product

0 Proxxon 28176 14-Tpi Fine Toothed Band Saw Blade for MBS 115/E Swedish Steel

Review Proxxon 28176 14-Tpi Fine Toothed Band Saw Blade for MBS 115/E Swedish Steel

Buy Cheap Proxxon 28176 14-Tpi Fine Toothed Band Saw Blade for MBS 115/E Swedish Steel From Here Now!
These high-performance band saw blades are extremely efficient and are very unlikely to break, even when being used for prolonged periods. Each band saw blade is alternately set with teeth in N-form, which are individually sharpened. This type of toothing provides oscillation-free operation of the saw blade, which is extremely important in order to obtain straight and clean cuts.
Readmore

Technical Details

0 Carving and Engraving 11 Piece Mini Accessory Kit for Dremel Rotary Tools

Review Carving and Engraving 11 Piece Mini Accessory Kit for Dremel Rotary Tools

Buy Cheap Carving and Engraving 11 Piece Mini Accessory Kit for Dremel Rotary Tools From Here Now!

Readmore

Technical Details

See more technical details

Images Product

Friday, March 26, 2010

0 Proxxon 28186 Diamond Blade for MBS 115/E

Review Proxxon 28186 Diamond Blade for MBS 115/E

Buy Cheap Proxxon 28186 Diamond Blade for MBS 115/E From Here Now!
These high-performance band saw blades are extremely efficient and are very unlikely to break, even when being used for prolonged periods. Each band saw blade is alternately set with teeth in N-form, which are individually sharpened. This type of toothing provides oscillation-free operation of the saw blade, which is extremely important in order to obtain straight and clean cuts.
Readmore

Technical Details

- Extremely narrow blade it is optimal for cutting the tightest curves and radius in hard materials
See more technical details

Images Product

Thursday, March 25, 2010

0 Dremel 767-01 6-Volt Two-Speed Alkaline MiniMite Rotary Tool

Review Dremel 767-01 6-Volt Two-Speed Alkaline MiniMite Rotary Tool

Buy Cheap Dremel 767-01 6-Volt Two-Speed Alkaline MiniMite Rotary Tool From Here Now!
This is the 6V MiniMite Two Speed Cordless Dremel Rotary Tool. / / FEATURES: Two speeds, 7,000 and 14,000 RPM / Perfect for small projects / Two year limited warranty through manufacturer / / INCLUDES: One 6V Cordless Dremel Rotary Tool, five accessories / (accessories may vary) and instruction sheet / / SPECS: Input: 6V, DC / RPM: 7000 and 14000 RPM / Weight: 0.75lbs (340g) / Collet Capacity: 1/32"-1/8" / cnh 7/27/09 / REQUIRES: Four AA Batteries (FUGP7300) ir/jxs / Update GX 1/15/10
Readmore

Technical Details

- Lightweight and Compact - Ideal for performance for precision and control with small projects and crafts
- Two Speed - Simplicity os odeal for a variety of materials.
- Includes 5 accessories - Carbide Grinding Stone, 60 and 120 grit sanding bands, and felt polishing wheel.
See more technical details
Customer Buzz

"Works Great with PowerGenix 1.6 Volt Rechargeable Batteries" 2010-03-20
By Ed Harris (Madison, WI USA)
Instead of using disposable alkaline batteries with this, I recommend using the new Nickel Zinc rechargeable batteries made by PowerGenix (search Amazon). In contrast to NiMH and NiCad batteries, which are 1.2 volt, these are 1.6 volt batteries! I am starting to use these new batteries for every application that normally uses 1.5 volt disposable batteries.

Customer Buzz

"nifty little dremel" 2010-03-03
By threadeater (Boston)
I bought this drill because it takes (4) AA batteries and I needed something portable.

I have an old Dremel circa 1973 that I have to dismantle to change

bits and a new corded one, which has more power and is a nice tool for at home.

This little guy fits comfortably in my smallish hand and is pretty quiet.

It also stands upright on the table when you're not using it.

You don't need a tool to change bits.

I just got it in the mail today so I can't say how long the batteries last.

However, I didn't get a model with rechargeable batteries because

they are bigger, heavier and replacing the rechargeable battery is half the price of the tool.

My only wish is that like the green "golf" model, it came with a little storage bag.

I use my Dremels for detailed jewelry/art work.

Customer Buzz

"Another great cordless tool from Dremel" 2010-02-18
By Hyun Yu
This is my fifth Dremel tool, all of which are in perfect working order--I know, I know, call me a Dremel junkie. I have the original 750 Minimite, 750-02 Minimite, the cordless Stylus, and a corded 3956-02 MultiPro Super. I mainly use them for my modelmaking hobby, and all three cordless Dremels are found on my workbench and get regular use. So convenient and useful for the hobby, as well as various odd jobs around the house.

I bought this 767 Alkaline Minimite on a whim, thinking to myself that this would be a useful tool to have when I run out of juice on my other tools in the middle of a project. This of course is a fallacy--I mean, what are the odds that THREE cordless tools I already have will all run out of juice at the same time? Not to mention the corded MultiPro Super I have. But, those seemed like minor and irrelevant objections in light of getting a new toy. I *am* a Dremel junkie...

Unlike my two older Minimites, which use removable rechargeable Ni-Cad battery packs, and the cordless Stylus, which uses non-removable, internal lithium battery, the 767 Alkaline Minimite uses four AA batteries. On the battery pack label it specifically states: "Use 1.5V AA Alkaline batteries only." I was able to use rechargeable NiMH batteries such as those used widely for digital cameras, although those are rated at 1.2V each (as opposed to alkaline batteries' 1.5V). Thus you'll get 4.8V total, not 6V like the alkaline batteries. I'm not sure how much of a performance hit there is with using 4.8V NiMH batteries. I'm also not sure why the warning to use only alkaline batteries. Here's a blurb I found on the web at [...]. It must be true since it's on the internet, right? :-) Anyway:

"Q: Can NiMH batteries be substituted for alkaline batteries even though they are only 1.2 volts?"

"A: Yes, for most high drain electronic applications NiMH batteries are ideal substitutes and you needn't worry about the apparent voltage differences. Even though alkaline batteries are rated at a nominal 1.5 volts, they only deliver 1.5 volts when they are fully charged. As they begin to discharge the voltage of alkaline batteries continuously drops. In fact, over the course of their discharge, alkaline batteries actually average about 1.2 volts. That's very close to the 1.2 volts of a NiMH battery. The main difference is that an alkaline battery starts at 1.5 volts and gradually drops to less than 1.0 volts. NiMH batteries stay at about 1.2 volts for most of their discharge cycle."

I should note that when fully charged, the 1.2V NiMH batteries show a voltage of around 1.4-1.45V according to my multimeter.

Appearance-wise, the 767 Alkaline Minimite is very similar, if not identical, to the 750-02 Minimite that Amazon sells and which uses removable rechargeable Ni-Cad battery. You get a slightly higher speeds than the 750-02's 6,500 low and 13,000 RPM high speeds--the Alkaline Minimite has 7,000 low and 14,000 RPM high speeds. The tool shell is made of semi-translucent blue plastic. I don't know if it's my imagination, but the material used on the 750-02 Minimite seems a bit stronger than the Alkaline Minimite's. Maybe it's the plastic's translucency that's tricking my brain.

The 767 Alkaline Minimite comes with 5 accessories, and no batteries. The accessories are: Screw mandrel, silicon carbide grinding stone (cone-shaped), sanding mandrel with a drum, a spare drum, and a polishing wheel that screws on to the screw mandrel. It also comes with a 1/8" collet. The instruction booklet is technical and tells you mostly about the care and working of the tool, and very little about how to use the tool in various situations.

In use, the 767 Alkaline Minimite works just fine, as I've come to expect from the Dremel brand. The noise from the motor is on par with my 750-02 Minimite. The weight of the battery pack at the back of the tool (4.9oz) is about 20% heavier than the NiCad battery pack from the 750-02 Minimite (4.2oz). Overall weight is virtually identical versus the 750-02 Minimite, with the Alkaline Minite weighing 9.7oz with the batteries and the 750-02 weighing 9.3oz.

Overall, I'm pretty pleased with the 767 Alkaline Minimite. I mean, it's a cordless Dremel tool, what's there to not like? The only point I want to bring up is that of value. Here on Amazon, the 767 Alkaline Minimite sells for $26. For $3 more, you can get the 750-02 Minimite, which comes with a rechargeable battery and charger. Unless this is your only Dremel and you're worried about running out of juice in the middle of a project, it seems to me that it's a better value and sense to get the 750-02 with included rechargeable battery. But that's just me. On its own merit, the 767 Alkaline Minimite is a fine handheld cordless rotary tool.

Customer Buzz

"lovin it!" 2010-02-13
By L. White (MD United States)
this drill is wonderful. if u have real hard feet like i do [like the character, myra on the martin lawrence show then this is the drill for u] no more scraping the dry skin off your heels. my feet are so smooth now. the only bad thing i can say about this drill is that it gets "hot" if u use if for a long time. but just let it cool down and then continue. i use it on my hands as well[an avid gardener with the hardest hands in north america]

this drill is a must have!

Images Product

Dremel Mini Saw

Wednesday, March 31, 2010

0 4" Mini Table Saw Hobby Crafts 4500RPM w/ 2 Blades

Technical Details

Tuesday, March 30, 2010

0 Dremel MS400 MultiSaw Attachment

Technical Details

Monday, March 29, 2010

0 Dremel 575 Right Angle Attachment for Rotary Tool

Technical Details

Sunday, March 28, 2010

0 1/8" Mini Drill Saw

Technical Details

0 Proxxon 28174 24-Tpi Fine Toothed Band Saw Blade for MBS 115/E Swedish Steel

Technical Details

Saturday, March 27, 2010

0 Proxxon 28729 80mm Cut Off Wheels for KGS 80

Technical Details

0 Proxxon 28176 14-Tpi Fine Toothed Band Saw Blade for MBS 115/E Swedish Steel

Technical Details

0 Carving and Engraving 11 Piece Mini Accessory Kit for Dremel Rotary Tools

Technical Details

Friday, March 26, 2010

0 Proxxon 28186 Diamond Blade for MBS 115/E

Technical Details

Thursday, March 25, 2010

0 Dremel 767-01 6-Volt Two-Speed Alkaline MiniMite Rotary Tool

Technical Details

All Best Prices

Labels